Home >> Fishing >> Rod Holders

Rod Holders & Mounting Kits

Scotty, Ram Mounts, Yak Attack, And Flush Mount Rod Holders.

Rod Holders

Feelfree Swivel Fishing Rod Holder

Feelfree Swivel Fishing Rod Holder

Adjustable swivel fishing rod holder that you can fine tune to your preferred positions. The Feelfree Swivel rod holder's tube collapses back for east removal of rod.

€24.95

RAM Fishing Rod Holder - RAP119 2008

RAM Fishing Rod Holder - RAP119 2008

The RAM-119 consists of the RAM-TUBE™ fishing rod holder and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. 

Tube Dimensions:
Inner Diameter: 1.71"
Length: 10.0"
Height: 14.75"
Width: 3.12" 

Material:
Powder Coated Marine Grade Aluminum 

€37.95

Scotty Bait Caster With Mount (280)

Scotty Bait Caster With Mount (280)

Holds a bait caster reel in a cushioned cradle.
A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips.
Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.

 

Dimensions:

Baitcaster Interior Diameter: 1.30"

Mount Dimensions: 4" x 2" x 2"

Bolting Dimensions: 1 5/16" x 3 3/16"

€30.95

Scotty Rod Master II With Mount (350)

Scotty Rod Master II With Mount (350)

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin.
Includes No. 241 Combination Side/Deck Mount which allows mounting on a flat deck surface or the side of a gunnel or transom.

 

Dimensions:

Rodmaster ll Interior Diameter: 1.85"
Mount Dimensions: 4" x 2" x 2"
Bolting dimensions: 1 5/16” x 3 3/16”

€30.95

Scotty Triple Rod Holder & Mount (256)

Scotty Powerlock with Mount (230)

Open style rod holder with a universal cradle that holds almost any style of reel. The Powerlock features a front locking ring to prevent your fishing rod falling out while on the move. Manufactured from reinforced nylon providing strength and reliability.

 

This Power lock includes a No. 241 Side / Deck Mount which allows mounting on a flat deck surface or on the side of a gunnel or transom.

Power lock Interior Diameter: 1.95"

Mount Dimensions: 4" x 2" x 2"

Bolting Dimension: 1 5/16" x 3 3/16"

 

€31.95

Scotty Triple Rod Holder & Mount (256)

Scotty Flyrod holder with Mount (265)

The Scotty Flyrod holder allows hands free trolling with a fly rod. It is fully adjustable and includes a safety strap.
Includes No. 241 Combination Side/Deck Mount which allows mounting on a flat deck surface or on the side of a gunnel or transom.
Fly Rod Holder Interior Diameter: 1.16"
Mount Dimensions: 4" x 2" x 2"
Bolting Dimensions: 1 5/16" x 3 3/16"

 

 

€32.95

Scotty Triple Rod Holder & Mount (256)

Scotty Rocket Tube with mount (476)

Fully Adjustable rod holder that can accommodate all rods and can attach to any Scotty Downrigger Boom.
Main features:
- Heavy Duty Stainless Steel
- Unique Side or Deck Mounting Bracket with new Lock Down Feature
- Tilts up and down, including upright for rod storage when travelling
- Less missed strike opportunities
- Swivels 360 degrees
Includes 241L Locking "push button" Combination Side / Deck Mount. To use
the new Scotty "lock-down" mount system, simply choose the best direction
to fish from and insert the rod holder or accessory, pushing the post straight 
down into the mount. Can be mounted on top or side of gunnel.
Rocket Launcher Interior Diameter: 1.70"
Mount Dimensions: 4" x 2" x 2"
Bolting Dimensions: 1 5/16" x 3 3/16"

 

 

 

€30.95

Scotty Triple Rod Holder & Mount (256)

Scotty Triple Rod Holder & Mount (256)

Manufactured from super tough fibre reinforced engineering grade nylon, this triple rod holder system is the best choice of anything on the market. It has a handy tool and lure rack to keep things organized and can swivel 360 degrees as well as each rod holder can swivel 360 degrees and tilt for ultimate versatility.

The No. 256 configuration comes with three No. 230 Powerlock rod holders that perfectly cradle all makes and models of rods and reels. Each Powerlock rod holder has a locking ring to fully secure your rod for travelling.

€132.95

Hobie Rod Holder Extension

Hobie Rod Holder Extension

Keep your fishing rods secure and reels higher
out of the water. These fit right into the molded-in rod holders and offer a larger diameter sleeve that is deeper. Leash the holder extension to the boat and the rod to the holder using the molded eyes.

€26.32

Hobie Rod Holder Extension

Perception Flush mounted Rod Holder kit (KIT-FISH002)

Individual flush mount rod holders designed to to fit the majority of kayaks & sit-on tops. Requires a flat surface area to fit them too.

€19.95

Feelfree Flush Mount Rod Holders

Feelfree Flush Mount Rod Holders

Flush FeelFree rod holders come complete as a pair. Allow you to upgrade you standard FeelFree sit-on-top to fishing kayak. Suitable for fitting to Nomad Sport, Gemini Sport, Juntos & Move.

€24.95

Rod Holder Mounting Options

Scotty Rectangular Flush Deck Mount (244)

Scotty Rectangular Flush Deck Mount (244)

Sealed base for watertight applications (such as kayak decks).
For all Scotty post mount rod holders.

 

Dimensions:

Dimensions: 4” x 2” x 2”
Bolting Dimensions: 1 5/16” x 3 3/16”

€12.95

Scotty Round Flush Deck Mount (344)

Scotty Round Flush Deck Mount (344)

Sealed base for watertight applications (such as kayak decks) with splash cover. For all Scotty post mount rod holders.

 

Dimensions:

Diameter: 3 3/4” 
Bolting Dimensions: 2 3/16” x 2 3/16”

€13.95

Scotty Combination Side Or Deck Mount (241)

Scotty Combination Side Or Deck Mount (241)

Allows mounting on a flat surface or on the side of a gunnel or transom.

For all Scotty post mount rod holders.

 

Dimensions:

Dimensions: 4” x 2” x 2”
Bolting dimension: 1 5/16” x 3 3/16”

€13.95

Scotty Gear Head Track Adaptor 438

Scotty Gear Head Track Adaptor 438

Let's you use all Scotty rod holders with 3 1/2" wide track systems. Made with glass filled nylon. Fits Bert's, Trax Tech, etc. Stainless Steel fasteners included.

€20.95

Scotty Rod Holder Height Extender (259)

Scotty Rod Holder Height Extender (259)

Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6 1/2”, allowing for faster access when that fish strikes. Made from super tough re-enforced nylon.

Works with Scotty post mount rod holders (except No. 240 Striker).

€18.95

Scotty Adjustable Rod Holder Extender (459)

Scotty Adjustable Rod Holder Extender (459)

Extends the height of the rod holder by 6 1/2". Compatible with any Scotty downrigger boom mounted rod holder.
- Comes with a star knob bolt.

 

€21.95

Scotty Extended Gear Head Adaptor (429)

Scotty Extended Gear Head Adaptor (429)

Bring your rod closer to you and snap it into place with the Scotty Gear-Head Mount Extender. Customize the 429 with the Scotty rod holder and mount of your choice!

-Comes with No. 428 Gear Head Mount, No. 459 Adjustable Rod Holder Extender, and No. 412 post mount.

€36.95

Scotty Camera/ Compass Mount (135)

Scotty Camera/ Compass Mount (135)

The Scotty camera mount is fully adjustable and is compatible with standard and sports cameras without needing an extra adaptor. It fits to all Scotty mounting systems.
Mount on any pole from 5/8" - 1 3/8" in diameter.
The top plate also works great for mounting a compass or any other device that mounts on a flat surface.

 

€26.95

Scotty Gimbal Mount Rod Holder Adaptor (253)

Scotty Gimbal Mount Rod Holder Adaptor (253)

Allows the use of Scotty rod holders with factory installed flush
mounted rod holders.

 

 

 

€39.95

Scotty Mini Rod Holder Height Extender (254m)

Scotty Mini Rod Holder Height Extender (254m)

Increase your odds with easier access to your rod and reel.

Extends the height of a rod holder by 8 1/2”.

Stainless steel shaft.

Works with all Scotty post mount rod holders.

€22.95

Scotty Paddle Clip (136)

Scotty Paddle Clip (136)

Somtimes simple is the best design for a product and the Scotty Paddle Clip is not only simple, it's STRONG! We spread out the mounting points, opened up the size of the mounting holes, beefed up the sidewalls and made sure it securely held every paddle we clipped into it.

Mount it in a convenient location on your watercraft and... no worries, this low profile clip will take care of holding your paddle!

€12.95

RAM Round Base 1.5” Ball - RAM202

RAM Round Base 1.5” Ball - RAM202

The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. 

Material: 
Powder Coated Marine Grade Aluminum 

Ball Size: 
1.5" Rubber Ball Size 

€20.95

RAM Post Scotty Conversion

RAM Post Scotty Conversion

Keeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM Ball Wedge Base expands to accommodate holes from 7/8”- 1” diameter and locks in tight. Once installed, you have the perfect way to mount anything from RAM Rod holders, GPS, Cell Phone, Cup Holder, Fishfinder, or Flash Light which can all be supported and perfectly positioned using this great new product. 

Compatible With: 
Scotty™ bases
Hobie Kayaks with sail mount ports 7/8”- 1” diameter 

Material: 
High Strength Composite 

Ball Size:
1" Ball "B" Size 

Note: 
The "U" in the part number reflects product packaged in poly bag. 

€21.95

RAM Flush Mount Wedge Adapter with 1.5inch Ball

RAM Flush Mount Wedge Adapter with 1.5inch Ball

The new RAM Wedge adapter for flush mount rod holders is a great way to mount a wide variety of RAM products. Simply slide the wedge into the round opening of your flush mount rod holder and tighten the screw to secure the wedge. The RAM wedge adapter base expands to accommodate openings with an inner diameter of 1 1/2" to 1 7/8". Once installed, you have the perfect way to mount anything from RAM Rod holders, Cup Holders, Cameras, Fishfinders, and much more. Whether you are trying to get your rod and reel up off the deck to avoid salt spray, need more versatility in rod holder placement, or simply need another mounting position and don't want to drill holes, this is your perfect solution. 

Compatible Flush Mount Inner Diameter Tube:
1 1/2" to 1 7/8" 

Features:
1. Patented rubber ball and socket technology dampens shock and vibration
2. Ball and socket provides multiple articulation and adjustment points
3. Compatible with popular RAM-ROD™ and RAM-TUBE™ fishing rod holders
4. High quality materials prevent corrosion
5. No drilling necessary
6. Molded stoppers prevent wedge adapter from sliding to the bottom of your flush mount rod holder
7. Lifetime warranty

Material: 
High Strength Composite

Ball Size: 
1.5" Rubber Ball Size 

€39.95

RAM Flush Mount Wedge Adapter with 1inch Ball

RAM Flush Mount Wedge Adapter with 1inch Ball

The new RAM Wedge adapter for flush mount rod holders is a great way to mount a wide variety of RAM products. Simply slide the wedge into the round opening of your flush mount rod holder and tighten the screw to secure the wedge. The RAM wedge adapter base expands to accommodate openings with an inner diameter of 1 1/2" to 1 7/8". Once installed, you have the perfect way to mount anything from RAM Rod holders, Cup Holders, Cameras, Fishfinders, and much more. Whether you are trying to get your rod and reel up off the deck to avoid salt spray, need more versatility in rod holder placement, or simply need another mounting position and don't want to drill holes, this is your perfect solution. 

Compatible Flush Mount Inner Diameter Tube:
1 1/2" to 1 7/8" 

Features:
1. Patented rubber ball and socket technology dampens shock and vibration
2. Ball and socket provides multiple articulation and adjustment points
3. High quality materials prevent corrosion
4. No drilling necessary
5. Molded stoppers prevent wedge adapter from sliding to the bottom of your flush mount rod holder
6. Lifetime warranty

Material: 
High Strength Composite

Ball Size: 
1" Rubber Ball "B" Size 

€36.95

Feelfree Uni Track System Mounting Plate

Feelfree Uni Track System Mounting Plate

The Feelfree Uni-Trak Accessory Mount offers versatility and ease of attaching any Scotty or Ram Mount accessory without drilling into your boat. This unique track system by Feel Free is designed in conjunction with the Moken 10 lite, 12.5 and 14. Simply attach any Scotty or Ram Mount to the Uni-Trak plate and you are able to insert the Trak Runner into the Track rail on the boat. The mount can be slid forward and backward and locked into the perfect position with the dual cams. The Uni-Trak Accessory Mount lets you easily remove your mounts for transport or to transfer to another boat.

 

  • Fits into the Uni-Trak Rail on the Moken 12.5 and Moken 14 Angler kayaks
  • Add accessories without drilling into your boat
  • Slide rail system allows you to get and lock into that perfect position
  • Fits Scotty and Ram accessories

€36.95

Wilderness Systems SlideTrax Plate

Wilderness Systems SlideTrax Plate

Attach rod holders, fish finders, GPS, etc. to the Wilderness Systems SlideTrax system.


The SlideTrax Mounting Plate provides a secure, flat, and pre-drilled mounting platform which will not rust or corrode. Fits Wilderness Systems Tarpons with SlideTrax 5½" (14cm) x 2½" (6.4cm) flat mounting surface. Pre-drilled for Scotty or RamMount rod mounts, and can be drilled for custom outfitting or accessories.


SlideTrax mounting hardware is included.

 

€48.95

Stainless Steel Fishfinder Mount Fittings

Stainless Steel Fishfinder Mount Fittings

Ideal kit for attaching your fishfinder to the Above RAM mounts.
Contains 4 Bolts, 8x Washers, and 4 Nuts.

 

€3.95

Well Nut With Marine Grade Stainless Steel M5 Bolts - Pack Of 4

Well Nut With Marine Grade Stainless Steel M5 Bolts - Pack Of 4

Perfect for mounting rod holders, fishfinder's, etc to your kayak when you have no access to use a nut and bolt. Pack of 4.

 

€4.95

 

 

Opening Hours

Mon-Fri: 10h00 - 17h30
Sat: 10h00 - 17h00
Bantry Bay Canoes - Ireland's Leading Canoe & Kayak Shop

Ireland's Biggest Canoe & Kayak Store
Bandon West Cork
Telephone 023-8829771
Shopping Basket: €0.00 | 0 Items